Description
DIMENSIONS OF SURROUND (Milimetres)
- A: 245 mm, OUTER DIAMETER OF SURROUND
- B: 226 mm, WHERE THE ROLL STARTS
- C: 192 mm, WHERE THE ROLL ENDS
- D: 180 mm, INNER DIAMETER OF THE SURROUND
- This part will suit the following models & many others: Pioneer CSG101W, CSG-101W, CSG-101-W, HPM200, HPM-200, DSS-5, DSS5, DSS 5, 38516, CS-701, CS701, CS-F45, CSF45, CSG-100W, CSG100W, CSG-101WAII, CSG101WAII, CSG-2000, CSG2000, CSG-200W, CSG200W, CSR-580, CSR580, DSS-5, DSS5, HPM-40, HPM40, HPM-500, HPM 500, HPM-60, HPM60, HPM-700, HPM700, 25-727F, 25-727F-1, 25-728A, 25-750A, 25-750A-3, 25-766A, 25-778A, 2H-407-9P, 5878790, 648813, Aria 50, Aria 50 II, Pro 10, Pro 120, Pro Musica 120, Pro Musica 130, Project 120, Project 100A, Project 100B, Quartet 50, S-1010, S-510, S-510, S-X6, XD11.
- To help select a replacement Surround: It is important to measure your speaker accurately to ensure you order the most suitable surround. Use a good ruler or tape. Double check each measurement. The (B) and (C) dimensions are the most important. You must be within 5mm from your required dimension so it does not affect the performance of the speaker. If the (A) Dimension is bigger than you require, it can easily be trimmed to suit your dimensions (This is very common for Speaker Repairers to do. If you cut the surround unevenly it can be easily covered by a gasket for a neat finish. This is shown in the instructions). The (D) dimension is the lip surface that is glued onto the cone, as long as there is more than 3mm of gluing surface if will be perfect.
- If you are still uncertain of which surround to choose, please contact us with the (ABCD) Dimensions and we will help choose the correct surrounds for you.
